VLS Roulette Forum

Advantage Play (roulette wheel physics) => Wheel Bias => : taariqmajid November 22, 2012, 10:32:50 -03:00

: help me please im new
: taariqmajid November 22, 2012, 10:32:50 -03:00
hi in my country there is only one casino 2 roulette tables for 4 years i think there is a bias.IM going to record a 2000 wheel spin 100 each day or 200 each day then ill ask you to please advise me how to find the bias.
: Re: help me please im new
: bombus November 23, 2012, 04:14:17 -03:00
Hello taariq,

Welcome to the forum.

Be very careful when profiling the wheels. You don't want to raise any suspicions.

Good luck.
: Re: help me please im new
: Steve November 23, 2012, 08:24:39 -03:00
See nolinks://nolinks.genuinewinner.com/roulette-wheel-bias/ but there are much better ways to beat roulette
: Re: help me please im new
: Timo March 06, 2013, 08:51:26 -03:00
: taariqmajid  November 22, 2012, 10:32:50 -03:00
hi in my country there is only one casino 2 roulette tables for 4 years I think there is a bias.IM going to record a 2000 wheel spin 100 each day or 200 each day then ill ask you to please advise me how to find the bias.
Hi, if you find the bias ( if there is ) it will be newer sooner than you change your underwear, heh just kidding but dont let you hard work go to sand.

Regards Timo
: Re: help me please im new
: Steve March 06, 2013, 11:15:38 -03:00
Every wheel has some bias. Its impossible for it not to. But most times its not significant.

To succeed these days with bias analysis, you must use what I call 'dynamic bias' which is a short term bias that occurs from short term conditions. With normal bias analysis, you need thousands of spins. The issue with dynamic bias is you need to do a proper analysis with far fewer spins, because the bias is always changing. This is not easy and you need proper software to do it. Some of my software can to a degree but there are still better and easier ways to beat roulette.
: Re: help me please im new
: taariqmajid December 27, 2013, 03:33:12 -03:00
im in a 3rd world country and i dont think they change wheels im 99% the wheel is bias anyone who has the device or software etc send me your skype i will send you the details and if its biased and we can take advantage of it we can make some money. Also i have contacts here workers spinners etc who can try spin area so im sure we can make some money