VLS Roulette Forum

Roulette System Development & Testing => Roulette Coding Zone => Topic started by: zelx77 on April 17, 2013, 04:19:19 PM

Title: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: zelx77 on April 17, 2013, 04:19:19 PM
Hello All

I have been playing around with a very simple high bankroll method and was hoping someone could RX code it for me. 

My method: Easy as 1,2,3

Results so far:

Using Weisbaden numbers

Wheel Type: European wheel

Total spins tested - 6,000

Winning spins – 3,913

Balance: +£19, 565 (using £5 chips)

How it works

There are only 3 bet types that repeat over and over:

Bet 1 – Bet on dozen 2 & 3
Bet 2 – Bet on dozen 1 & 3
Bet 3 – Bet on dozen 1 & 2

And just repeat this over and over. On a win, start from 1st progression again.  We are betting on the single dozen we are NOT betting on to NOT follow a hit pattern of:

Dozen 1
Dozen 2
Dozen 3
Dozen 1
Dozen 2
Dozen 3
Dozen 1
Dozen 2
Dozen 3

Progression (£5 chips):

Spin #   On both dozen        Stake   Total    Win   Profit
1   £5 (1 unit)   £10   £10   £15   £5
2   £15 (3 units)   £30   £40   £45   £5
3   £45 (9 units)   £90   £130   £135   £5
4   £135 (27 units)   £270   £400   £405   £5
5   £405 (81 units)   £810   £1210   £1215   £5
6   £1215 (243 units)   £2430   £3640   £3645   £5
7   £3645 (729 units)   £7290   £10930   £10935   £5

After 6,000 spins I reached no. 7 of progression 3 times, 6 (twice), 4 (25 times) and 5 (15 times).  The vast majority only make 1,2,3 stage of progression.

Can someone code this for me on RX 2.0 as I want to see how many spins it takes to get past the 7th progression?

All the best,

Zelx77
Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: bombus on April 19, 2013, 04:03:53 AM
Quote from: zelx77 on April 17, 2013, 04:19:19 PM
Hello All

I have been playing around with a very simple high bankroll method

7   £3645 (729 units)   £7290   £10930   £10935   £5


Hello zelx77.

Welcome to the forum, but...

Let me just say, there is NOTHING simple about outlaying £10930 to win £5.  :diablo:



Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: zelx77 on April 19, 2013, 05:25:15 AM
I totally agree - I think I am more interested about the long WWWWWWWWW streaks and how to exploit that.
Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: Chris on April 19, 2013, 05:36:15 AM
Betting on 2 dozens has proven to me over the years, it is a failure; Betting two units to win one, let alone the progression is not an effective way of betting.... Just my 2 cents thanks.

Chris
Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: insidebet on April 19, 2013, 02:21:23 PM
Bombus,

Everybody goes through this phase.  I just would love to watch his face when the ball is going round' and round' and round  with this kind of money on the carpet...

Insider
Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: ausguy on April 20, 2013, 09:41:34 PM
What live dealer casino, either real chip or live on line has limits on the DOZENS above 2,000 GBP ?   Not many if any?  Airball or RNG I don't know too well but of the ones I've seen the limits are similar to the live games listed here.

While it is possible to check out many of the on line roulette games, I find it all too hard as most want you to sign up and deposit some money. Not many cater for a player doing some "homework". They like the player who plays for luck & mostly loses, that's where most of their profits come from.

Here's a few that I know of & most well under 2k.  Smart Live (SL) 5 - 600 & columns 1 - 600. Dublinbet only 1 - 50. Party Casino (Latvian girls) 2 - 2,000 (The highest I know of). Using Party Casinos limits zelx77 as an example your bet limit would not get past stage 1 of level 6 as stage 2  of 2430 is 430 over the max.

My local real casino here in Sydney Ozzland has chip tables with doz/col limits of $10 - $500 & also $25 - $1,000 higher bet tables.

Any bet plan must operate within the table bet limits.  It boils down to the minimum to maximum bet limit ratio.  Dublin is 50 : 1. SL 120 : 1 & 600 : 1 (col.)

My local casino 50 : 1 & 40 : 1.  Party casino 1,000 : 1.  As it can easily be seen there is a wide range of limits & bet ratios between different casinos.

A quick tally of your bets to stage 1 L6 ( Using Party casinos limits) = a loss of over 5,100GBP. That alone equals 1,020 x 5GBP bets.

Adding all your progressions to L7 & 4th stage & 10,935 totals 49,120 quid.

All up not a very wise betting plan.  49,000GBP invested in a bank at 5%pa interest will earn you about 47 quid per week with nil risk & zero work or worry.

How about betting 35/37 numbers on a Euro wheel as an alternative to winning just 5 quid?  On a 5 x 35 = 175 min. on a simple double up Marty style bet you could get to L5 & 80 X 35 = 2,800 in chips for a total required bank of 5,425. Your odds on a win per spin is 94.59%.

On Party Casino EVEN money bets just doubling up from 5 - 1280 needs a bank of 2,555. This allows bets to L9.

Study up MM = Money Management on CC & this forum for starters. Also look at bet strategies & system play sectios.

You need to put your energies in a direction that requires far less outlay & for much higher return % than 5GBP per spin.

Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: ausguy on April 20, 2013, 09:54:28 PM
zelx77 - re your coding query. I just noticed Azim in the coding section on VLS is offering free rx & CC++ coding. His post was only 4 lines down from the top so should be easy to find.
Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: zelx77 on April 23, 2013, 01:55:46 PM
Thanks for your feedback chaps - I agree with you that this is a bit crazy.  Having looked through the site, I've seen some really interesting strategies - I particularly like john solitude's pattern breaker.  Seems you can win more than you lose with that.

Another method I've been toying with involves charting 5 spins and recording which 4 square row/block they fall in I.e:

'1 - 4 - 7 - 10'
'13 - 16 - 19 - 22'
etc

You have 9 of these blocks.

Starting off:

If I see that within the 5 spins at least 3 separate blocks have hit, I mark them with a 1 (round 1).  This sets you up for round 2. 

Round 2 - I place 16 chips to cover 4 blocks including the last ones to hit from previous round.  On Skyvegas pro roulette (RNG) I turned £250 into £1,200 using this exact method. 

It's very rare that all 9 blocks will hit in 9 spins - you regularly get repeaters.

I can explain this in more detail if interested. 
Title: Re: £19.5K after 6,000 spins - any RX coders to code this simple system?
Post by: Azim on April 24, 2013, 03:50:31 AM
For those of you wanting this in the RX-Code, here it is:

method "main"
begin
    While Starting a New Session
    begin
        Call "reset"
        if record "SpinCount" data = 1 then
        Begin
            put 1 on 2nd Dozen;
            put 1 on 3rd Dozen;
        End
    end

    While on Each Spin
    begin
        if any outside bet won each time
        begin
            put 1 on record "Progression" data index;
        end
        if any outside bet lost each time
        begin
            add 1 to record "Progression" data index;
        end
        Add 1 to record "SpinCount" data;
        if record "SpinCount" data = 1 then
        Begin
            put 100% of record "Progression" data  on 2nd Dozen;
            put 100% of record "Progression" data  on 3rd Dozen;
        End
        if record "SpinCount" data = 2 then
        Begin
            put 100% of record "Progression" data on 3rd Dozen;
            put 100% of record "Progression" data on 1st Dozen;
       
        End
        if record "SpinCount" data = 3 then
        begin
            put 100% of record "Progression" data on 1st Dozen;
            put 100% of record "Progression" data on 2nd Dozen;
            Put 0 on record "SpinCount" data;
        end

    end
   

end
method "reset"
begin
    Put 1 on record "SpinCount" data;
    Put 1 on record "Progression" data index;
    Set List [1,3,9,27,81,243,729] to record "Progression" data;
end