Try it!!

[pablos]

Too big to attach it here. Have to upload it somewhere else. Do you wait before download ? To free download you need to wait some time on the website above.

I dont know why you have some troubles with uploading.com. Maybe you just dont wait enough time. Anyway try this.

nolinks://nolinks.sendspace.com/file/jfci1c

[simongae]

Hi Pablos. . .

these file are incorrect. 

it watches this screen. . .


the version with (Divisor, 6 Target, no safety break) works very well. . . .

thanks a lot... for your job !!

[pablos]

I have to check it but maybe you put numbers in wrong column. In version for dozens and columns you insert numbers only in column X not in column C (it won't work then). I wrote about it in post about 6/6 no safety break. It pertains to both versions. I thought it was clear. At first sight second version works good. I have to take a detailed look.

[simongae]

I insert the numbers in column x, but this is the result...

[pablos]

I have to take a look. On my computer it looks like work good. I use and made it in Open Office but it should work good in MS Office as well although I dont guarantee that but I think it is not the reason. Did you do something else with the file or put some other numbers somewhere else ? Maybe try download once again and can you tell me which link did you use to download ?

[simongae]

I have still download the program, but the problem is equal

to this link:

nolinks://nolinks.sendspace.com/file/jfci1c

[pablos]

Here is how it looks on my computer. Does anyone else have the same problem with this file ? On my computer looks good. My only though now is that maybe it is caused by different language or program used to open the file if you use MS Office. I 'll check it once again maybe I used some  letters which your program dont recognize. Here are the same commands as in version 12/6 s safety break for dozens only. If that version worked good for you ?

Can you check it ?

nolinks://uploading.com/files/b9bm15m4/buju_lanky_sf3.xls/

[Breeze88]

Hey Pablo

i tried it  and it works .. and i dont even use excel .. i use open office scalc ..

thnx cheerz

[simongae]

I ask because any help would be appreciated. I am also not expert of excel but I wanted to add few more functions. I think that playing columns and dozens (I am working on it) in the same time it is a good idea but playing without safe break is dangerous even with target 6. I made some tests and when there is no safety break fluctuations of bankroll can be really high.

Like I supposed playing with safety break is better that without it but safety break depending on divisor value is not good either because lowest divisor 3 doesn't mean than bet can't be high. Sometimes bets go high. I don't know maybe changing it for 4 would change it some way but I think that best solution would be safety break depending on value of bet although firts test I made weren't a good as I thought.


I made calculator for betting in the same time on dozens and columns.

6 Divisor, 6 Target, no safety break

nolinks://uploading.com/files/22mdabdm/buju_lanky_dozens_6_6_dc2.xls/

here you insert numbers in column X on main page instead of C as it was in previous version

I tried to apply safety break like in 12/6 calculator but when I made test the results were terrible so I dont know if I made some mistakes or just this safety break caused this. I made some test on 1000 spins on the calculator above and graph looks nice going steadily up but sometimes sharp slumps can be really big. I think that sometimes safety break can cause bets even higher than without it. It is because without safety break stakes reset more often and when the safety break is applied then after one bad series stakes doesn't make it to reset before the second bad series come. I think that it is needed safety break depending on bet value or for example depending on loss value but so far I couldn't make it.

this version work

I don't know why. There is no any problem on my computer just have to wait some time before download but try this.

nolinks://vlsroulette.com/full-systems/try-it!!/?action=dlattach;attach=6113

and this version..
work for me..

[pablos]

If you use Open Office can you check this one ? and if problem still occur can you check each dozen tab and show me some example how it look ?

I use 2.2 version of Open Office and it works good on my computer.

nolinks://uploading.com/files/a79497e9/buju_lanky_dozens_12_6_dc2sf3%25282%2529.ods/

[simongae]

I have open this file with 2 programs

1: OpenOffice 3.2
2: Microsoft Excel 2003

this the result....

[Breeze88]

Hey Pablo


Both sheets work perfectly with  open office i use 3.1 .. thnx for your work ..


btw.. did a quick test with some wiesbaden spins ..  highest bet was 1188 units .. scary .. but still ended up  way in profit ..

cheerz

[pablos]

I dont know why there is a problem with this newest calculator. I have to check it. Maybe I should upgrade my open office nad see then. I used the same commands as in 12/6 3 safety break for dozen. I have to compare these two files but I dont know if I find the mistake because on my computer everything works good anyway I will try.

Hey Pablo


Both sheets work perfectly with  open office I use 3.1 .. thnx for your work ..


btw.. did a quick test with some wiesbaden spins ..  highest bet was 1188 units .. scary .. but still ended up  way in profit ..

cheerz

What you mean by both sheets work with open office 3.1. You say about both 12/6 and 6/6 for dozens and columns with .xls extension or about this last with .ods extension ?

That is why I want to apply different safety break. Safety break in present form is good but dont guarantee that bets wont go high.

[simongae]

ok thanks many...
      

[Breeze88]

 pablo

those two sheets work with  open office 3.1

nolinks://uploading.com/files/b9bm15m4/buju_lanky_sf3.xls/ 


nolinks://uploading.com/files/a79497e9/buju_lanky_dozens_12_6_dc2sf3%25282%2529.ods/

[Breeze88]

-